| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19260403 I02 I |
| Issuance Date |
2011-11-29 |
| Current Penalty |
960.0 |
| Initial Penalty |
2400.0 |
| Final Order |
2011-12-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph: a) Employees were exposed to electrical shock from unguarded live wires. No abatement certification or documentation is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19260405 G01 II |
| Issuance Date |
2011-11-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2011-12-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.405(g)(1)(ii): Flexible cords were not equipped with an attachment plug and energized from a receptacle outlet when used as permitted in 29 CFR 1926.405(g)(1)(i) [C], [F], or [H]: a) Flexible cords were not energized from a receptacle outlet. No abatement certification or documentation is required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19260405 G02 III |
| Issuance Date |
2011-11-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2011-12-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap: a) Flexible cords being used to power electrical equipment were spliced directly into a breaker box. No abatement certification or documentation is required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19260404 B01 I |
| Issuance Date |
2011-11-29 |
| Current Penalty |
960.0 |
| Initial Penalty |
2400.0 |
| Final Order |
2011-12-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.404(b)(1)(i): The employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites: a) Employees were provided with electrial tools and equipment connected by cord and plug without the use of an assured equipment grounding conductor program or ground fault circuit interrupters (GFCI's). No abatement certification or documentation is required for this item. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19260501 B01 |
| Issuance Date |
2011-11-29 |
| Current Penalty |
1695.0 |
| Initial Penalty |
4200.0 |
| Final Order |
2011-12-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) Employees performing masonry work were exposed to fall hazards from the roof of a 5 story building. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. |
|
